top of page
Only available for Logged-in member. Please login or register to access this information
Manual for WSSFC-AG | FW5
Normally Stock
Replaced by
Replaced by
Item codes | FW Released Date | Changes Information |
|---|---|---|
WSSFC-AG-01 | 08/10/2024 | Add functions of tilt alarm hysteresis, communication re-trial, average filter, outliner filter, tilt calibration; Update RC5 - RC 7; Add other information, sending cycle for production, tilt values, hardware error, power source, battery type to memory map; Update 15-minute measurement/alarm/cycle; Add POWER_SOURCE, X/Y/Z_TILT_ALARM, TENTAVITE to uplinks; Update FORCE, CYCLIC DATA, and ALARM uplinks |
1
QUICK INSTALLATION GUIDE
1.1 Introduction
1.2 Application Notes
1.3 When does device send Uplink messages?
1.4 Default Configuration
1.5 Battery/ Power Supply
1.6 What's in the Package?
1.7 Guide for Quick Test
1.8 Installation
1.9 Payload Document and Configuration Tables
1.10 How to connect device to Back-end/ Network Server/ Coordinator
2
MAINTENANCE
2.1 Troubleshooting
2.2 Maintenance
3
ADVANCED GUIDE
3.1 Principle of Operation
3.2 Configuration
3.3 Calibration/ Validation
4
PRODUCT SPECIFICATIONS
4.1 Specifications
5
WARRANTY & SUPPORT
5.1 Warranty
5.2 Support
bottom of page